Even if I run PSpice-For-TI_setup.exe and enter my email address and access key, a message like the one attached appears and I cannot sign in. What could be the cause?

I am working on AM2431 ALV and trying to implement BissC encoder based on motro control sdk v9.2.0.09, with example bissc_diagnostic_signle_channel_am243x-lp. A big difference is that pins is changed ...

I read in an old TI forum post that the DP83869HM may successfully connect with a 1000Base-KX connection (i.e., from a backplane MAC/PHY copper SERDES connection to the SIP/N and SOP/N pins) IF the ...

I am considering using the OPAx189 as a low-pass filter buffer. This would just be a resistor and capacitor LPF, with an OPAx189 as a unity gain buffer on the output. For this example, suppose the ...

I want to read 3 gpio from u-boot source code and I want to set u-boot environment variable according to gpio status. How can I configure gpio as input and read status those gpios from u-boot source ...

One of my customers is using TI C2000 F280025C-Q1 in their design for Electronic Coolant Pump EE. Most of the SW dev is already done but they are now stuck at achieving the optimal performance of the ...

Are you using an example project as the basis for your project? If not, I recommend referring to one of those examples to make sure you have the proper libraries linked and include options configured.

Using SDK 10.0.0.35 with ccs 12.8.0.00012 and TMDSCNCD263P trying to run enet_cpsw_socket_am263px-cc_r5fss0-0_freertos_ti-arm-clang. Created a very simple network like the example suggests ...

There is no API available for checking the integrity of the SBL image. If really required, the ROM bootable image is signed with X.509 certificate which contains SHA512 hashes of the different ...

I'm going to use AWR1642EVM with DCA1000 to get the MIMO raw data, and generate a virtual antenna array. (as figure 5) (FIGURE BELOW IS FROM TI DOCUMENT.) I know that there are two TX and four RX on ...

I am working with the 280039C launchxl board. I have a C:\ti\c2000\C2000Ware_5_02_00_00\driverlib\f28003x\examples\spi working which has a .syscfg file - ...

Would you mind if we ask TLV9002? There is the description "Open-loop output impedance=1200ohm" on the datasheet. We would like to know output impedance in case of ...