I read in an old TI forum post that the DP83869HM may successfully connect with a 1000Base-KX connection (i.e., from a backplane MAC/PHY copper SERDES connection to the SIP/N and SOP/N pins) IF the ...

I am working on AM2431 ALV and trying to implement BissC encoder based on motro control sdk v9.2.0.09, with example bissc_diagnostic_signle_channel_am243x-lp. A big difference is that pins is changed ...

One of my customers is using TI C2000 F280025C-Q1 in their design for Electronic Coolant Pump EE. Most of the SW dev is already done but they are now stuck at achieving the optimal performance of the ...

I'm working on this part number "TMS320F2808PZA" and i can't found Software tools for code generation for this family i tried Sysconfig and i can't found this family in it. is there any solution you ...

I am considering using the OPAx189 as a low-pass filter buffer. This would just be a resistor and capacitor LPF, with an OPAx189 as a unity gain buffer on the output. For this example, suppose the ...

I want to read 3 gpio from u-boot source code and I want to set u-boot environment variable according to gpio status. How can I configure gpio as input and read status those gpios from u-boot source ...

There is no API available for checking the integrity of the SBL image. If really required, the ROM bootable image is signed with X.509 certificate which contains SHA512 hashes of the different ...

I am doing the simulation in LTspice. With the same circuit, I see something wrong with the output of LM2903B. May I ask for some help? Either my circuit is wrong or the model itself is not correct.

I am working with the 280039C launchxl board. I have a C:\ti\c2000\C2000Ware_5_02_00_00\driverlib\f28003x\examples\spi working which has a .syscfg file - ...

Are you using an example project as the basis for your project? If not, I recommend referring to one of those examples to make sure you have the proper libraries linked and include options configured.

Would you mind if we ask TLV9002? There is the description "Open-loop output impedance=1200ohm" on the datasheet. We would like to know output impedance in case of ...

Looking at the EVM circuit, it was confirmed that 7.87K and 82.5K are divided into 3.3V voltage and input, but is it not possible to input 3.3V with a 10K pull-up? I need an accurate guide on what ...