One of my customers is using TI C2000 F280025C-Q1 in their design for Electronic Coolant Pump EE. Most of the SW dev is already done but they are now stuck at achieving the optimal performance of the ...

I'm working on this part number "TMS320F2808PZA" and i can't found Software tools for code generation for this family i tried Sysconfig and i can't found this family in it. is there any solution you ...

I am considering using the OPAx189 as a low-pass filter buffer. This would just be a resistor and capacitor LPF, with an OPAx189 as a unity gain buffer on the output. For this example, suppose the ...

There is no API available for checking the integrity of the SBL image. If really required, the ROM bootable image is signed with X.509 certificate which contains SHA512 hashes of the different ...

I am doing the simulation in LTspice. With the same circuit, I see something wrong with the output of LM2903B. May I ask for some help? Either my circuit is wrong or the model itself is not correct.

I am working with the 280039C launchxl board. I have a C:\ti\c2000\C2000Ware_5_02_00_00\driverlib\f28003x\examples\spi working which has a .syscfg file - ...

Are you using an example project as the basis for your project? If not, I recommend referring to one of those examples to make sure you have the proper libraries linked and include options configured.

Would you mind if we ask TLV9002? There is the description "Open-loop output impedance=1200ohm" on the datasheet. We would like to know output impedance in case of ...

Looking at the EVM circuit, it was confirmed that 7.87K and 82.5K are divided into 3.3V voltage and input, but is it not possible to input 3.3V with a 10K pull-up? I need an accurate guide on what ...

Using SDK 10.0.0.35 with ccs 12.8.0.00012 and TMDSCNCD263P trying to run enet_cpsw_socket_am263px-cc_r5fss0-0_freertos_ti-arm-clang. Created a very simple network like the example suggests ...

This is FAE Jayden, my customer would like to know can they use 9Vin in their use case? From the datasheet, VCC may go blow 6V when Vin is lower than 10V. I just wanna double check about this. Thanks.

I read in an old TI forum post that the DP83869HM may successfully connect with a 1000Base-KX connection (i.e., from a backplane MAC/PHY copper SERDES connection to the SIP/N and SOP/N pins) IF the ...