Cat5 cables were the best option for wired networking (also called Ethernet) for a long time. But since the release of Cat6, that's changed. Cat6 is now considered the minimum standard for ...

In order to make these cables, the TIA/EIA 568-B wiring standard is used for one of the ends and the the TIA/EIA 568-A wiring standard is used for the other. Instructions on Making Ethernet Cables ...

A friend of mine and I are having a debate.<BR><BR>He and I both agree that "electrically" the order of your Ethernet patch cable wiring shouldn't matter, as long as you're consistent.

For Gigabit Ethernet (1000BASE) the 1000BASE-T1 variant is similar in that it uses PAM-3 for the encoding, but requires (500 MHz capable) Cat-6A cabling due to its 375 MHz bandwidth requirements.

A network cable basically consists of a patch cable and two network connectors (formally known as RJ45 modular plugs) attached to each of its ends. The job of making your own cable is attaching ...

Plug one end of the crossover CAT cable into the Ethernet port on the first computer. Plug the other end into the second machine. The connectivity LED on both network cards should be flashing ...

Cabling Bad network cabling can lead to a whole host of issues, including a slow network. When the prevalent speed of an Ethernet network was 10 Mbps over Category 3 or 5 cabling, a little problem ...

Ethernet is the most common type of local area network (LAN) technology, and it involves a hardwired connection to the internet. Ethernet comes in several varieties including Fast Ethernet ...